R500E Recycling system
These recycling systems are based on the latest design of Recycling technology for HDD operations. Features like the foldable walkways and special airbladders instead of old-fashioned springs optimize the logistics for the systems.
- Plug and Play unit. Upon arrival only 2-3 hoses and the generator need to be connected
- No heavy lifts with frame parts, hoses, piping or such is required. Only opening of the foldable walkway and safety rails setup.
- No parts like the shakers have to be secured before transport which save even more time.
- 500 ltr/min. Is actually 500 ltr/min! 20% sand inlet, less than 1% out @ 60 sec viscosity 1.2 gr/cc spec. gravity
- The shakers are working parallel which offers the big advantage that one can stop one shaker for screen change or such whilst keep recycling over the remaining shakers. So one shaker cannot cause a complete standstill of the entire unit. When used on smaller sites one may only use two or three shakers.
CE certification of conformity as well as full manual is included, and system is sandblasted and painted in 2-component RAL colour of choice (non-metallic) including inside if the tanks
|Dimensions||2,5 x 2,5 x 2,3 mtr|
|Weight||+/- 3850 kg|
|Capacity||500 L/min @ max. 20% solids in, less than 1% out at 60 sec viscociteit|
|Cones||4 x 4" Cones + 4 x 5" Cones|
|Screen area||3,3 m2|
|Drive||30 Kw elektro motor|
|pump||1 x MCM centrifugal pump|
|Optional||-Electric valves on outlet with remote control box with 20 mtr cable|